Afternoon all!
Got an old Retrotrip I am looking at fitting to our old MGB. Straight forwards enough I guess, but....there's always a but...
Looks similar to the Retrotrips on your web site but the face counters on this one are held in with some screws. Also, the illumination is from 2 small bulbs soldered in the hood.
The power cable is the same, Brown possitive & Green/Yellow Earth with a three core cable that goes to the sensor. Wire colours there are Brown, Blue & Green/Yellow. So which terminals on the sensor do each wire go to? Would be a bit miffed if i got it wrong & melted the internals of this Retrotrip meter.
Looking forwards to your replies.
Many thanks in advance.
Merv!
Retro trip have some advice along the all sought that was at this forum it was able to get some parts that was useful. I need to have some aspiration that was at https://www.b2bnn.com/2019/08/how-to-educate-students-with-b2b-content/ this was good to read along all parts that was useful to be get along all facilities on this.