Brantz Forum

Can anyone please help me identify which is the pulse wire I need to use to wire up a separate satellite seeker I just bought. The red and green wires match the power and ground wires on the seeker cable which leaves one to be connected to the pulse feed on the unit but I have no way of identifying which of the two remaining wires (blue or yellow) this actually is. Can anyone help with this? Please note that I only have two cables coming out of the main unit, one cable leads to the plug you see in the photo and the other goes to the trip zeroing button on the white box. Many thanks, Albert Pisani Malta

Hello, I have just bought the above which includes a satellite seeker. Having never owned a trip meter before the instructions on calibration are a little unclear. My question is as im connecting a satellite seeker do I still need to calibrate it?, the calibration pulley wheels on the front are set to 579. Can anyone offer advice on what they need to be set at if at all with a satellite seeker fitted. Any help is much appreciated.

Hi I have an MX5 Mk1 which I am planning to fit a Brantz 2 International , its never been used but is about 10 years old . All seems to work ok but I need a gearbox sensor , can you advise which one as i have no idea what thread is on the gearbox or speedo . many thanks