This item is a specil order item, please contact us direct to order or please see Wheel Sensor (BR2B) as an alternative.
This almost universal 12mm diameter Wheel Sensor can be mounted on a suspension strut so that it picks up the bolt heads off the brake disk as they pass by. A minimum of 4 bolts is required, however 6 is recommended. The more pick-up's available the more accurate the tripmeter will be. It has a 1mm sensing distance.
An alternative positioning for this type of sensor is to pick up on flying tabs (minimum of 2 positioned 180* apart) fatened on the bolts of the Prop Shaft's Universal Joint.
N.B. Old tripmeters (Pre-2005) can be upgraded to work with this sensor at the Brantz factory for a small charge, or free of charge if the meter comes in for a service.
Cable Length: 2.1m
Brantz Wheel Sensor (BR2A)
This wheel sensor design is also available in the following formats:
All Brantz Products come with a 12 month guarantee.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging.
If the packaging has been opened you will be subject to a Test & Restocking Fee.
Please keep the receipt.
